There is a lot to do. Because of the difficulty in removing stubborn dirt, people tend to delay the crucial moment or limit it to a superficial but unsatisfactory cleaning. If the oven is dirty, it can be seen through the glass, an unsightly factor that spoils the atmosphere in the kitchen. Thanks to this method, known only to a few people, it is possible to restore the shine to the oven: it will be as good as new. All you need is aluminum foil and a dishwasher cleaning tablet. Any type of tablet will do.
This is a great product for cleaning the dishwasher, but it will work great in other areas too. It should be placed in a container and immersed in boiling water to ensure that it dissolves completely. The amount of water needed is not excessive. Now let’s look at how this process works specifically. How to clean the oven with the aluminum foil method: Once you try it, you will never go back
When you are dealing with persistent and carbonized deposits, you should immediately calm your soul. Using a degreaser and a simple damp cloth will never be enough. This type of dirt tends to mix with the oven itself and create very black, carbonized and unsightly stains. Faced with this level of pollution we must act differently. The cuticles must be left to soften so that they dissolve and disappear. To soften them we must use our liquid solution of water and the dissolved tablet. We dip a dish sponge in this liquid and start scrubbing the surfaces, both the inside and the glass. The sponge must be well soaked.
With this procedure we will remove the first layer of dirt: the sponge will turn black. Then wash the sponge and clean the dirty surfaces to remove any residue. If the situation still does not convince you, it is time to take the foil.
Moisten all the affected areas with the previously created liquid. Then spread a sheet of tin foil so as to cover the entire surface. Let it work for at least five minutes. After the necessary time has passed you can continue: when you remove the card you will notice that all the dirt has remained attached. Thanks to the aluminum the inlays soften and disappear much more easily. Crumple the film and scrape off any residue. Then wash everything: no traces of encrustations remain!
